The largest selection of
generator, water pump, pressure washer, chainsaw, and lawn mower
products at the lowest prices anywhere. Powered by Honda, Mitsubishi,
Yamaha, Onan, Kawasaki, Robin, Coleman, Porter Cable, Multiquip,
Detroit Diesel, Yanmar, Generac, Snapper, Husqvarna, Jonsered, Karcher
and more!
Uses
standard 18 Ga. brads from 5/4" to 1-1/4" long
Special
hardened driver blade
Quick-release
nosepiece for fast clearing of jams
Sequential
fire trigger
Strong
and light weight die-cast body
Anodized
magazine with visual reload indicator
Safety
located behind the driving guide for driving brads in tight spaces
Depth
adjustment for exact setting of nail head
Removable
rubber nose protects delicate work
Directional
exhaust port
Includes
tool, 1/4" male quick coupler with dust cover, OSHA/ANSI approved
safety glasses, black carrying case with provision to store 5, 000
brads, box of 1,000 brads, oil and allen wrenches, and operating manual
Shipping Weight: 7.9 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
BN125A
18 Ga. Brad Nails
5/8 - 1-1/4
100 Brads Visual Reload Indicator
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential Fire
8-3/8
10
2-3/8
7.9
MSRP:
$232.00
Model - BN200A: 18 Ga., 2" Brad Nailer Kit
Uses
standard 18 Ga. brads from 3/4" to 2" long
Special
hardened driver blade
Quick-release
nosepiece for fast clearing of jams
Sequential
fire trigger
Strong
and light weight die-cast body
Anodized
magazine with visual reload indicator
Safety
located behind the driving guide for driving brads in tight spaces
Depth
adjustment for exact setting of nail head
Removable
rubber nose protects delicate work
Directional
exhaust port
Includes
tool, 1/4" male quick coupler with dust cover, OSHA/ANSI approved
safety glasses, black carrying case with provision to store 5, 000
brads, box of 1,000 brads, oil and allen wrenches, and operating manual
Shipping Weight 9.3 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
BN200A
18 Ga. Brad Nails
3/4 - 2
100 Brads Visual Reload Indicator
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential Fire
9-5/8
10-1/8
2-3/4
9.3
MSRP:
$330.00
Model - FN250B: 16 Ga., 2-1/2" Finish Nailer Kit
Uses
standard 16 Ga. Finish nails from 3/4" to 2-1/2" long (will accommodate
3/4" to 1-1/4" with supplied magazine insert
Special
hardened driver blade
Depth-of-drive
adjustment to match application
Quick-release
nosepiece
Removable
rubber safety nose
Strong
and light weight die-cast body
Ergonomic
handle with rubber grip
Muffled,
adjustable exhaust port
Rugged
top-load aluminum magazine
Includes
nailer, magazine insert to adapt for 3/4" to 1-1/4" nails, 1/4" male
quick coupler with dust cover, OSHA/ANSI approved safety glasses, black
carrying case with provision to store 2,500 nails, box of 1,000 finish
nails, oil and allen wrenches, and operating manual
Shipping Weight: 10.3 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
FN250A
16 Ga. Finish Nails
3/4 - 1-1/4
1-1/2 - 2-1/2
100 Nails
Lever Release Latch
Hinged Lever Type Quick Release
Nose
70-120 PSI
Sequential and Bump Fire
11-1/8
13-1/4
4-1/4
10.3
MSRP:
$400.00
Model - DA250A: 15 Ga., 2-1/2" Angle Nailer Kit
Uses
Senco-type 15 Ga. angle finish nails from 1-1/4" to 2-1/2" long
Special
hardened driver blade
Depth-of-drive
adjustment to match application
Rubber
safety tip prevents marring of work
Quick-release
nosepiece for fast clearing of jams
Muffled,
adjustable exhaust port
Strong
and light weight die-cast body
Aluminum
magazine with hardened steel nail guide rail
Includes
tool, 1/4" male quick coupler with dust cover, OSHA/ANSI approved
safety glasses, black carrying case with provision to store 1,000 angle
finish nails, box of 1,000 nails, oil and allen wrenches, and operating
manual
Shipping Weight: 17.4 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
DA250A
15 Ga. Senco-type Angle Finish
Nails
1-1/4 - 2-1/2
100 Nails
Lever Release Latch
Hinged Lever Type Quick Release
Nose
70-120 PSI
Sequential and Bump Fire
11-7/8
13-1/4
6
17.4
MSRP:
$153.20
Model - US58: 22 Ga., 5/8" Upholstery stapler Kit
22 Ga., 5/8" Upholstery stapler
Kit, Model #US58
Small and light weight for ease of
operation
3/4" nose extension for limited
clearance fastening
Steel top cap for durability
Rear exhaust port channels air away
from work
Driver guide moves back with
magazine, so when magazine is opened, a jam can easily be cleared
Uses standard Senco "C" Type, 22
Ga., 3/8" crown staples from 1/4" to 5/8" long
Convenient bottom-load magazine
holds 185 staples
Includes stapler, 1/4" coupler w/
dust cap, OSHA/ANSI approved safety glasses, oil and allen wrenches,
and operating manual
Shipping Weight: 4.7 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
US58
22 Ga. 3/8 Crown Staple
1/4 - 5/8" leg
185 Staples
Drop Type
-
70-120 PSI
Trigger
6
9
1-3/4
4.7
MSRP:
$170.00
Model - NS100A: 18 Ga., 1" Narrow Crown stapler Kit
Uses standard 18 Ga. 1/4" crown
staples from 1/2" to 1" long
Special hardened driver blade with
quick-release nosepiece
Sequential fire trigger
Strong and light weight die-cast
aluminum body
Safety located behind the driver
guide for driving staples in tight spaces
Depth adjustment for exact setting
of nail head
Removable rubber nose protects
delicate work
Directional exhaust port
Standard equipment: 1/4" male quick
coupler with dust cover, OSHA/ANSI approved safety glasses, black
carrying case with provision to store 5,000 staples, box of 1,000
staples, oil and allen wrenches, and operating manual
Shipping Weight: 8 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
NS100A
18 Ga. 1/4 Crown Staple
1/2 - 1 leg
100 Staples
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential Fire
8-1/2
10-1/4
2-3/8
8
MSRP:
$246.00
Model - NS150A: 18 Ga., 1-1/2" Narrow Crown stapler Kit
Uses standard 18 Ga. 1/4" crown
wire staples from 1/2" to 1-1/2" long
Special hardened driver blade with
quick-release nosepiece
Strong and light weight die-cast
body
Rugged top-load magazine with steel
staple rail
Safety located behind the driver
guide for driving staples in tight spaces
Depth adjustment for exact setting
of nail head
Removable rubber nose protects
delicate work
Directional exhaust port
Standard equipment: 1/4" male quick
coupler with dust cover, OSHA/ANSI approved safety glasses, black
carrying case with provision to store 5,000 staples, oil & allen
wrenches, box of 1,000 staples, and operating manual
Shipping Weight: 8.1 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
NS150A
18 Ga. 1/4 Crown Staple
1/2 - 1-1/2 leg
100 Staples
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential and Bump Fire
9-5/8
10-3/8
2-1/2
8.1
MSRP:
$466.00
Model - MS200: Medium Crown stapler
Drives "N" wire 16 Ga. 7/16" crown
construction staples from 1" to 2" long
Powerful piston with ring design
that prevents cylinder bore scuffing - lasts far longer than
conventional "O" rings
Adjustable exhaust diffuser
Open top-load magazine with
push-button follower accommodates two 70-staple strips or three
50-staple strips
Quick release nosepiece for easy
clearing of jams
Depth-of-drive adjustment to enable
fastening without staple drive-through
Standard Equipment: stapler, 3/8"
NPT air inlet w/ 1/4" male quick coupler with dirt and dust cover,
OSHA/ANSI approved safety glasses, black carrying case, oil and allen
wrenches, and operating manual
Shipping Weight: 13.5 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
MS200
16 Ga. 7/16 Crown Staple
1" - 2" leg
150 Staples
Lever Release
Lever Type Latch
70-120 PSI
Sequential and Quick Release Nose
10-3/4
14-1/8
5-7/8
13.5
MSRP:
$510.00
Model - RN175: Roofing Coil Nailer
Drives standard .120 Dia., 15
degree wire-collated roofing nails from 7/8" to 1-3/4" long
Will fasten a full bundle of
shingles without reloading
Powerful, high performance motor
with adjustable exhaust diffuser
Refined feed mechanism includes
double cams and guides and quick-adjust support for all nail lengths
Steel safety foot with dual carbide
inserts and adjustable shingle guide
Steel protectors with rubber
inserts protect tool and stop sliding
Quick-click depth-of-drive adjuster
Standard equipment: nailer, 3/8"
NPT air inlet with 1/4" male quick coupler with dirt and dust cover,
OSHA/ANSI approved safety glasses, oil and allen wrenches, and
operating manual
Shipping Weight: 10.9 lbs
Model #
Fastener Type (Inches)
Fastener Range
Magazine Capacity
Magazine Release
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
RN175
.120, 15 degree Roofing Nails
7/8 - 1-3/4
120
Lever Release Latch
70-120 PSI
Contact Trip or Dual Action
10-1/8
11-3/4
5.1
10.9
MSRP:
$510.00
Model - FC350: Clipped Head Framing Nailer Kit
Uses standard 32 degree to 34
degree paper collated clipped-head stick nails from 2" to 3-1/2" x
.113" to .131"
Rugged aluminum magazine holds two
nail strips at at time
Depth-of-drive adjustment to match
application
Barbed nose for easy toe
nailing…also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhaust port
Includes nailer, 3/8" male quick
coupler with dirt and dust cover, OSHA/ANSI approved safety glasses,
black carrying case, oil and allen wrenches, and operating manual
Shipping Weight: 17.2 lbs
Model #
Fastener Type
Fastener Range
Magazine Capacity
Magazine Release
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
FC350
Clipped Head
.113 x 2
.131 x 3-1/2
97 nails
Lever Release Latch
70-120 PSI
Sequential and Bump Fire
15
19-1/2
7-1/2
17.2
MSRP:
$510.00
Model - FR350: Round Head Framing Nailer Kit
Uses standard 22 degree plastic
collated full-round-head stick nails from .113" x 2" to .131" x 3-1/2"
(also .148" x 2-1/4" to 3")
Rugged aluminum magazine holds two
nail strips at at time
Depth-of-drive adjustment to match
application
Barbed nose for easy toe
nailing…also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhaust port
Includes nailer, black carrying
case, 3/8" male quick coupler with dirt and dust cover
Shipping Weight: 18.6 lbs
Model #
Fastener Type
Fastener Range
Magazine Capacity
Magazine Release
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
FR350
Round Head
.113 x 2
.131 x 3-1/2
72 nails
Lever Release Latch
70-120 PSI
Sequential and Bump Fire
14
19-1/2
7-1/2
18.6
MSRP:
$532.00
Model - FR350MAG: Magnesium Round head Framing Nailer
Uses standard 22 degree plastic
collated full-round-head stick nails from 2" to 3-1/2" x .113" to .131"
and 2-1/4" to 3" x .148"
Light-weight magnesium housing
Rugged aluminum magazine holds two
nail strips at a time
Nail lockout mechanism alerts
operator to reload tool
Jam release knob located on magazine
Depth-of-drive adjustment to match
application
Barbed nose for easy toe
nailing...also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhuast port
Standard Equipment: Nailer, 3/8"
male quick coupler with dirt and dust cover, OSHA/ANSI approved safety
glasses, oil & allen wrenches, and operating manual
Shipping Weight: 11.4 lbs
MSRP:
$610.00
Model - COIL350: 3-1/2" Magnesium Coil Framing Nailer
Drives standard 15 degree
wire-collated coil framing nails from 1-1/2" to 3-1/2" x .099" to .131"
Light-weight magnesium housing
Powerful, high performance motor
with adjustable exhuast
Refine feed mechanism includes
double cams and guides and quick-adjust support for all nail lengths
Quick-click depth-of-drive adjuster
Standard Equipment: Nailer, 3/8"
NPT air inlet with 1/4" male quick coupler with dirt and dust cover,
OSHA/ANSI approved safety glasses, oil & allen wrenches, and
operating manual
Shipping Weight: 11.6 lbs
MSRP:
$615.00
Model - COIL250: 2-1/2" Framing Nailer
Drives standard 15 degree
wire-collated coil framing nails from 1-1/2" to 2-1/2" x .099" to .120"
Light-weight housing
Powerful, high performance motor
with adjustable exhuast
Refine feed mechanism includes
double cams and guides and quick-adjust support for all nail lengths
Quick-click depth-of-drive adjuster
Standard Equipment: Nailer, 3/8"
NPT air inlet with 1/4" male quick coupler with dirt and dust cover,
rugged carrying case, oil & allen wrenches, and operating manual
Shipping Weight: 12.6 lbs
MSRP:
$880.00
Model - FCN200: 2" Flooring Cleat Nailer
Drives from 1 1/2" - 2" "L" shape
cleat nails
Strong, lightweight, die-cast
aluminum construction with steel magazine base
Non-Marring base is designed to
allow driving of fastners close to wall
better balance for stability - tool
sits upright for smoother floor installation
fitted is angled so hose dose not
interfere with magazine or operator
Eronomic design with longer handle
for easier use
Unit comes fully assembled and
ready for use right out of the box
Hardened driver blade for longer
life
provides better holding power while
allowing the floor to contract and expand
Pneumatic driving action
consistently drives fastners for better finished installation
Includes: Nailer, mallet, air tool
oil, Allen wrenches, 1/4" industrial male plug, and owner's manual
Shipping Weight: 18 lbs
MSRP:
$463.00
Model - CFBN125A: 1-1/4" Brad Nailer and 2 HP Compressor
18 Ga. Brad Nailer with:
Qucik-release nose piece
Hardened driver blade
Depth-of-drive adjustment
Durable, rear-load magazine
Muffled, adjustable exhaust port
2 HP, 6 Gal. Pancake Compressor
with:
15 Amp, 120 VAC, 2 HP motor
Oil-free design for less maintenance
Ability to run on standard
household current
3.7 SCFM @ 40 psi - 2.7 SCFM @ 90
psi
Includes nailer #BN125A 2HP,
6Gallon, compressor, 25', 300 psi air hose with ferrules on both ends,
1/4" male and female couplers, Teflon(R) pipe joint tape, 1000 brad
nails, oil, wrenches, safety glasses, black shroud, black carrying
case, and operating manuals
Shipping Weight: 54 lbs
MSRP:
$490.00
Model - FR350NC: Round Head Framing Nailer Kit
Uses standard 22 degree plastic
collated full-round-head stick nails from .113" x 2" to .131" x 3-1/2"
(also .148" x 2-1/4" to 3")
Rugged aluminum magazine holds two
nail strips at at time
Depth-of-drive adjustment to match
application
Barbed nose for easy toe
nailing…also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhaust port
Includes nailer, 3/8" male quick
coupler with dirt and dust cover
fitted is angled so hose dose not
interfere with magazine or operator
Eronomic design with longer handle
for easier use
Unit comes fully assembled and
ready for use right out of the box
Hardened driver blade for longer
life
provides better holding power while
allowing the floor to contract and expand
Pneumatic driving action
consistently drives fastners for better finished installation
Includes: Nailer, mallet, air tool
oil, Allen wrenches, 1/4" industrial male plug, and owner's manual
Shipping Weight: 18 lbs
MSRP:
$590.00
Model - CFFN250A: 2-1/2" Finish Nailer & 2HP
Compressor Kit
16 Ga. Finish Nailer with:
Quick-release nose piece
Hardened driver blade
Depth-of-drive adjustment
Durable, top-load magazine
Muffled, adjustable exhaust port
2 HP. Peak 6 Gal. Pancake
Compressor with:
15 Amp, 120 VAC, 2HP peak motor
Oil-free design for less maintenance
Ability to run on standard
household current
3.7 SCFM @ 40psi - 2.6SCFM @ 90 psi
Includes: nailer, compressor, 25',
300psi air hose with ferrules on both ends, 1/4" male and female
couplers, Teflon pipe joint tape, 1000 finish nails, oil, wrenches,
safety glasses, and operating manuals
The ideal kit for the finish trim
installer:
On-Site trim Work, Architectural
Woodwork Installation, Case Work Installation
Shipping Weight: 54 lbs
MSRP:
$883.00
Model - CPFFR350: Round-Head Framing Nailer Combo Kit
2" TO 3-1/2" x .113" TO .148"
Round-head framing nailer
Uses standard 20-22 degree plastic
collated nails
3 peak HP, 4 gallon "side stack"
compressor
Oil-free design - No oil spillage
or work contamination
