The largest selection of
generator, water pump, pressure washer, chainsaw, and lawn mower
products at the lowest prices anywhere. Powered by Honda, Mitsubishi,
Yamaha, Onan, Kawasaki, Robin, Coleman, Porter Cable, Multiquip,
Detroit Diesel, Yanmar, Generac, Snapper, Husqvarna, Jonsered, Karcher
and more!
PARTNER - The
Manufacturer of the most Powerful
cutoff saw in the WORLD!
We are proud to offer
customers of Southwest Trading the complete line of PARTNER Cutoff
Saws and Accessories! Whether your job is big or small, PARTNER is
certain to have
a Cutoff Saw just right for YOU!
K650 - THE LIGHTEST 12" POWER CUTTER ON THE MARKET
The Partner K650
Active III is a further development of our gas-powered all-round
cutter, the K650 Active, and is among the most active cutters in the
world from several perspectives.
The revolutionary Active Air Filtration filter system and the robust
design makes the machine uniquely durable and reliable. It is seldom
out of action for servicing, being able to work actively for long
periods of time.
Long service intervals, high durability and fewer filter replacements
make it an obvious choice for tool hire companies and contractors. Its
flexibility, versatility and model ergonomics have also made it a
favourite among demanding users.
Reliable strength
and significantly less maintenance
Dust particles are a
cutting machine’s worst enemies. These machines work in incredibly
tough environments, where large quantities of dust clog filters and
reduce engine power. This is where you suffer costs from downtime.
The unique Active Air Filtration system separates 80–90 % of the
cutting dust from the intake air before it reaches the air filter. The
second filter stage comprises a three-layer, oil-impregnated plastic
foam filter, while a pleated paper makes up the final dust obstacle.
The unique system ensures that you retain a high output and reduce
repair and maintenance costs.
SmartCarb™
- A powerful breakthrough
Partner has
developed SmartCarb™, a carburetor with built-in filter compensation,
to keep the air/fuel ratio constant even when the filter is clogged.
This means that the engine power is retained and you do not need to
adjust the carburettor manually or replace the filter before it is
absolutely necessary. By integrating SmartCarb™ in the carburetor, we
achieve an extremely robust and reliable design with no protruding
vacuum hoses and no other external components that can come loose and
cause problems.
SmartCarb™ can be viewed as the fourth stage in the Active Air
Filtration system. Together, the systems produce maximum performance,
lower maintenance costs and lower fuel consumption.
The most powerful
cutter in its weight class
The Partner K650
Active III is a powerful cutting machine with a volume of 71 cm3 and
which only weighs 8.9 kg. The low weight and excellent ergonomics with
the slim-line engine casing and correctly positioned handles makes the
K650 Active III unbeatable in its class.
Dura Starter
The starter
mechanism on a cutting machine is extremely exposed to dust and dirt.
Partner has developed a completely sealed starter mechanism with a new
sealing system which prevents dust from entering the mechanism’s
sensitive parts. Dura Starter has also been provided with a stronger
starter cord with greatly increased durability.
Decompression
valve
The Easy Start
decompression valve makes it easy to start the engine. It minimises the
power that is required to start the engine and reduces wear and strain
on the starter mechanism. The valve is automatically closed at the
first ignition.
Reversible
cutting arm
The cutting arm can
be turned quickly and easily, allowing the user to cut close to wall or
the floor.
Automatic clutch
bearing lubrication
One special function
on Partner’s cutting machines is the automatic clutch bearing
lubrication. As the bearing operates in a very dusty, dry and hot
environment, it is exposed to heavy punishment. Automatic lubrication
reduces the risk of the bearing seizure, and therefore entails
increased reliability and reduced maintenance.
Enclosed
transmission
The drive belt on
all Partner’s petrol-powered cutters is totally enclosed – waterproof
and dustproof. Enhanced belt life also means improved reliability and
reduced service input.
Fuel filter with
increased filtration capacity
The new filter with
increased filtration capacity and a longer lifetime prevents cutting
dust and other dirt from entering and obstructing the fuel supply.
Technical data
Engine
Air
cooled, two cycle engine
Displacement
71
cc
Power
4.8
hp (3.5 kW)
Weight,
without blade
8.9
kg
Fuel
tank volume
0.70
l
Blade
Blade
Diameter
12''
(300 mm)
Cutting
Depth
4''
(100 mm)
Standard
arbor bushing
1''
(25.4 mm) *
* Replaceable 20 mm arbor bushing available
Features
• Active Air
Filtration
• SmartCarb™
• EasyStart
• Dura Starter
• Selflubricating clutch bearing
• Reversible cutting arm
• Ergonomic design
• Wet cutting kit
• Enclosed transmission
• Easy Adjustable blade guard
• Fuel indicator
Suitable for
• Light concrete
cutting
• General concrete cutting
• Pile cutting
• Minor asphalt work
• Masonry work
• Gas/water/sewer maintenance
• Dismantling work (auto, ship, airplane etc.)
• Landscape work
K700 - THE LIGHTWEIGHT AND EASY TO USE 14" POWER CUTTER
The Partner K700
Active III is a further development of our gas-powered all-round
cutter, the K700 Active, and is among the most active cutters in the
world from several perspectives.
The revolutionary Active Air Filtration filter system and the robust
design makes the machine uniquely durable and reliable. It is seldom
out of action for servicing, being able to work actively for long
periods of time.
Long service intervals, high durability and fewer filter replacements
make it an obvious choice for tool hire companies and contractors. Its
flexibility, versatility and model ergonomics have also made it a
favourite among demanding users.
Reliable strength
and significantly less maintenance
Dust particles are a
cutting machine’s worst enemies. These machines work in incredibly
tough environments, where large quantities of dust clog filters and
reduce engine power. This is where you suffer costs from downtime.
The unique Active Air Filtration system separates 80–90 % of the
cutting dust from the intake air before it reaches the air filter. The
second filter stage comprises a three-layer, oil-impregnated plastic
foam filter, while a pleated paper makes up the final dust obstacle.
The unique system ensures that you retain a high output and reduce
repair and maintenance costs.
SmartCarb™ – A
powerful breakthrough
Partner has
developed SmartCarb™, a carburettor with built-in filter compensation,
to keep the air/fuel ratio constant even when the filter is clogged.
This means that the engine power is retained and you do not need to
adjust the carburettor manually or replace the filter before it is
absolutely necessary. By integrating SmartCarb™ in the carburettor, we
achieve an extremely robust and reliable design with no protruding
vacuum hoses and no other external components that can come loose and
cause problems.
SmartCarb™ can be viewed as the fourth stage in the Active Air
Filtration system. Together, the systems produce maximum performance,
lower maintenance costs and lower fuel consumption.
Unbeatable
efficiency in the 70 cc class
The Partner K700
Active III is a powerful 71 cc cutter with excellent ergonomics,
providing you with an unbeatable tool in its class. Thanks to its
completely sealed filter system, the K700 Active is also easy to keep
clean and the engine delivers a high power output for a long time,
making the Partner K700 Active the most active 14" cutter in the world.
Dura Starter
The starter
mechanism on a cutting machine is extremely exposed to dust and dirt.
Partner has developed a completely sealed starter mechanism with a new
sealing system which prevents dust from entering the mechanism’s
sensitive parts. Dura Starter has also been provided with a stronger
starter cord with greatly increased durability.
Decompression
valve
The Easy Start
decompression valve makes it easy to start the engine. It minimises the
power that is required to start the engine and reduces wear and strain
on the starter mechanism. The valve is automatically closed at the
first ignition.
Reversible
cutting arm
The cutting arm can
be turned quickly and easily, allowing the user to cut close to wall or
the floor.
Automatic clutch
bearing lubrication
One special function
on Partner’s cutting machines is the automatic clutch bearing
lubrication. As the bearing operates in a very dusty, dry and hot
environment, it is exposed to heavy punishment. Automatic lubrication
reduces the risk of the bearing seizure, and therefore entails
increased reliability and reduced maintenance.
Enclosed
transmission
The drive belt on
all Partner’s petrol-powered cutters is totally enclosed – waterproof
and dustproof. Enhanced belt life also means improved reliability and
reduced service input.
Fuel filter with
increased filtration capacity
The new filter with
increased filtration capacity and a longer lifetime prevents cutting
dust and other dirt from entering and obstructing the fuel supply.
Technical data
Engine
Air
cooled, two cycle engine
Displacement
71
cc
Power
4.8
hp (3.5 kW)
Weight,
without blade
9.3
kg
Fuel
tank volume
0.70
l
Blade
Blade
Diameter
14''
(350 mm)
Cutting
Depth
5''
(125 mm)
Standard
arbor bushing
1''
(25.4 mm) *
* Replaceable 20 mm arbor bushing available
Features
• Active Air
Filtration
• SmartCarb™
• EasyStart
• Dura Starter
• Selflubricating clutch bearing
• Reversible cutting arm
• Ergonomic design
• Wet cutting kit
• Enclosed transmission
• Easy Adjustable blade guard
• Fuel indicator
Suitable for
• Light concrete
cutting
• Pile cutting
• Minor asphalt work
• Masonry work
• Gas/water/sewer maintenance
• Dismantling work (auto, ship, airplane etc.)
• Landscape work
K950 - A NEW CLASS OF 12", 14", AND 16" POWER CUTTERS
"When you work with
a Partner, you have all the benefits of the latest technology in your
grasp. With the K950 Active, we have combined 40 years of experience
with the latest advances, whilst always focusing on user ergonomics,
safety and reliability.
The result is a completely new power cutter with a slimmer, more
manageable body and a highly efficient 94 cc engine with the raw power
required for 16"" blades."
Convenience and
safety increase efficiency
Working with a
Partner machine is more efficient and safer thanks to the ergonomic,
balanced design with a sleek machine body, and the vibration isolated
handle system with perfect handle spacing. The K950 is easy and
comfortable to work with, which increases the productivity of both
machine and operator.
Longer service
intervals and less wear with Active Air Filtration
Cutting dust is the
enemy of all petrol power cutters since it gets sucked into the engine
and wears down piston, cylinder and bearings. Active Air Filtration, a
combination of three separate filter systems, is one of the many
Partner breakthroughs. The first active step separates the cutting dust
from the intake air through centrifugal force. Remaining dust gets
stuck in a second filter stage, made from a plastic foam filter,
saturated with oil and having a large surface area. A third filter
stage, made of pleated paper, provides additional reassurance that the
intake air is free from dust. With Active Air Filtration, up to 90% of
all the cutting dust is separated already in the maintenance free
centrifugal stage.
Maintaining raw
power longer increases efficiency and reduces service requirements
In order to assure
optimum power output, Partner developed a carburetor with built-in
filter compensation, SmartCarb™. It maintains a constant air/fuel ratio.
This maintains power output even as the filter becomes clogged. There
is no need to adjust the carburetor manually. Together, Active Air
Filtration and SmartCarb™ maintain high power output longer, reduce
filter costs, lower fuel consumption, and reduce exhaust emissions.
Reduced starting
cord resistance yields easy, smooth start
A high-compression
engine makes you pull hard on the starter cord.
With the EasyStart decompression valve, this problem is solved easily
and effectively. When you want to start, you just press the button that
opens the valve. The EasyStart valve reduces the compression in the
cylinder during the start, which means less wear on the starter
assembly. EasyStart reduces the force necessary to start the engine by
50%.
Sealed starter
mechanism reduces wear on starter cord and starter device
The new starter
mechanism is practically maintenance free due to a unique, patented
design - Dura Starter - which encloses the return spring and pulley
bearing. Several different seals prevent the cutting dust from reaching
the vital parts of the starter mechanism. We have also installed an
additional spring that prevents the pulley from vibrating - something
that could draw in dust.
Dust and water
proof transmission offers longer service interval with fewer
interruptions
The K950 Active has
an enclosed drive belt. This protects the transmission in the cutting
arm from dust and moisture. Having an enclosed transmission means
reduced wear, longer service intervals and fewer service interruptions.
New blade guard
To make cutting
easier and more comfortable, Partner has developed a completely new
blade guard with rubber bearings. A unique locking system makes it much
easier to set the guard to the correct position during cutting.
Reverse cutting
arm to allow easy cutting close to wall or ground
With the K950
Active, you can reverse the cutting arm. That makes it possible to cut
close to a wall or the ground, limited only by the blade guard.
Naturally, the excellent ergonomic properties of the machine are
reduced somewhat, but for some jobs, the ability to reverse the arm
makes all the difference.
Self-lubricating
clutch bearings increase clutch life and keep dust away
The clutch bearing
on the K950 Active is automatically lubricated by the engine's
lubricating system. This is an old Partner speciality. A hole in the
crank shaft feeds oil to the clutch bearing. The pressure that develops
in the crankcase, and spreads to the clutch bearing, keeps the bearing
free from dust particles - and that increases life.
K1250 - THE WORLDS LARGEST AND MOST POWERFUL POWER CUTTER
"Partner K1250
Active is the world's largest and mightiest power cutter!
A real power package for those who need maximum power to run 16"
blades. The K1250 Active is a superb cutter for work on large
foundations, robust beams, big pipes or large roof or wall components.
And in spite of the fact that the K1250 Active features an incredible
119 cc's it is surprisingly easy to handle thanks to its good balance
and ergonomic design."
Longer service
intervals and less wear with Active Air Filtration
Cutting dust is the
enemy of all petrol power cutters since it gets sucked into the engine
and wears down piston, cylinder and bearings.
Active Air Filtration, a combination of three separate filter systems,
is one of the many Partner breakthroughs. The first active step
separates the cutting dust from the intake air through centrifugal
force. Remaining dust gets stuck in a second filter stage, made from a
plastic foam filter, saturated with oil and having a large surface
area. A third filter stage,
made of pleated paper, provides additional reassurance that the intake
air is free from dust.
With Active Air Filtration, up to 90% of all the cutting dust is
separated already in the maintenance free centrifugal stage.
Maintaining power
output for a longer time increases efficiency and reduces service
requirements
In order to assure
optimum power output, Partner developed a carburetor with built-in
filter compensation, SmartCarb™. It maintains a constant air/fuel
ratio. This maintains power output even as the filter becomes clogged.
There is no need to adjust the carburetor manually.
Together, Active Air Filtration and SmartCarb™ maintain high power
output longer, reduce filter costs, lower fuel consumption, and reduce
exhaust emissions.
Reduced starting
cord resistance yields easy, smooth start
A high-compression
engine makes you pull hard on the starter cord. With the EasyStart
decompression valve, this problem is solved easily and effectively.
When you want to start, you just press the button that opens the valve.
The EasyStart valve reduces the compression in the cylinder during the
start, which means less wear on the starter assembly. EasyStart reduces
the force necessary to start the engine by 50%.
Dust and water
proof transmission offers longer service intervals with fewer
interruptions
The K1250 Active has
an enclosed drive belt. This protects the transmission in the cutting
arm from dust and moisture. Having an enclosed transmission means
reduced wear, longer service intervals and fewer service interruptions.
New easy
adjustable blade guard
To make cutting
easier and more comfortable, Partner has developed a completely new
blade guard with rubber bearings. A unique locking system makes it much
easier to set the guard to the correct position during cutting.
Reversible
cutting arm to allow easy cutting close to wall or ground
With the K1250
Active, you can reverse the cutting arm. That makes it possible to cut
close to a wall or the ground, limited only by the blade guard.
Naturally, the excellent ergonomic properties of the machine are
reduced somewhat, but for some jobs, the ability to reverse the arm
makes all the difference.
Self-lubricating
clutch bearing increases clutch life and keeps dust away
The clutch bearing
on the K1250 Active is automatically lubricated by the engine's
lubricating system. This is an old Partner speciality. A hole in the
crank shaft feeds oil to the clutch bearing, which keeps the bearing
free from dust particles - and that increases life.
Convenience and
safety increase efficiency
Working with a
Partner machine is more efficient and safer thanks to the ergonomic,
balanced design with a sleek machine body, and the vibration isolated
handle system with perfect handle spacing. The K1250 is easy and
comfortable to work with, which increases the productivity of both
machine and operator.
Technical data
Engine
Air
cooled, two cycle engine
Displacement
119
cc
Power
7.8
hp (5.8 kW)
Weight,
without blade, 14''
30.2
lbs (13.7 kg)
16''
32.2
lbs (14.6 kg)
Blade
Diameter
Cutting
Depth
14''
(350 mm)
5''
(125 mm)
16''
(400 mm)
6''
(145 mm)
Standard
arbor bushing
1''
(25.4 mm) *
* Replaceable 20 mm arbor bushing available
Features
• Active Air
Filtration
• SmartCarb™
• EasyStart
• Selflubricating clutch bearing
• Enclosed transmission
• Reversible cutting arm
• Easy Adjustable blade guard
• Ergonomic design
• Wet cutting kit
Suitable for
• Heavy concrete
cutting
• Pile cutting
• Asphalt cutting
• Dismantling work (auto, ship, airplane etc.)
• Pipeline cutting
• Demolition work
K40 - PNEUMATIC 14" POWER CUTTER THAT CAN CUT UP TO 5" DEEP
In the construction
industry, in engineering and especially in ship yards, compressed air
is often used as the power source. And while an air-powered Partner is
a natural choice indoors, it is also a valuable option outdoors in
places where the air-change rate is low, such as in pipeline trenches,
in deep foundation sites and on marine docks.
The Partner K30 and
K40 are powerful, highly robust and reliable industrial power cutters.
Their design is based on the Partner concept for ergonomics, safety and
efficiency. Being pneumatic-powered makes the Partner K30 and K40
perfect tools for indoor use, or for outdoor work where there is a
supply of compressed air.
The Partner K30 and K40 have the same basic layout as Partner's
petrol-driven cutters, i.e. with the motor located behind the blade
guard, driving the blade via a belt. This design helps to ensure a
long, slim overall tool shape, plus good weight distribution and good
balance laterally and between the handles.
One very important
factor for the comfort and safety of the operator is the fact that both
handgrips are in line with the blade. This means that the weight of the
machine is directly in line with the blade, thereby helping prevent any
cutting out of true.
The ratio of the belt transmission between motor and blade has been
carefully selected to optimise the power output from the motor.
Technical data
Engine
Air
motor
Power
4.3
hp (3.2 kW)
Air
requirement
<100
cfm (2.8-3.5 m³/min)
Max.
air pressure
7
bar (7 kp/cm²)
Weight,
without hose, mist lubricator and blade
21.6
lbs (9.8 kg)
Blade
Blade
Diameter
14''
(350 mm)
Cutting
Depth
5''
(125 mm)
Standard
arbor bushing
1''
(25.4 mm) *
* Replaceable 20 mm arbor bushing available
Features
• Automatic mist
lubrication
• Reversible cutting arm
• Slim body, and excellent balance
• Wet cutting kit as standard equipment
• Ideal for indoor use or pollution sensitive areas
For indoor cutting,
an electric Partner is ideal, since a power socket is seldom far away.
An electric Partner
is equally useful underground in mines, where timber props have long
since been superseded by reinforced concrete and steel profiles. The
Partner K2300 EL has all the power it takes for a 5" (125 mm) cutting
depth, wherever there are concrete, steel reinforcements and piles to
be cut and adjusted on site.
